The Yinma brand thick material outer line robot is widely used, but long-term use will cause certain damage to the equipment. In order to slow down the occurrence of this kind of thing, now I will summarize the maintenance work of the equipment for everyone. .
The first point is that the lubricating oil during the installation of the thick-material outer line machine is mainly used to keep the rotating part of the outer line machine lubricated, and to reduce the wear degree of the parts in it to extend the service life of the outer line machine. Under normal circumstances, use the special lubricant for the external line machine after use, and add 1 to 2 drops to the friction part of the equipment, which can help maintain the role of the oil film. One thing to remind here is that in order to achieve the effect of lubrication, oil should be dripped on the running part, and the machine should be turned manually after dripping.
What needs attention is the daily cleaning of the thick material outer thread machine. During the use and placement of the outer thread machine, dust, cloth scraps, pile, etc. will not fall into the feed dog and shuttle bed. Therefore, to ensure The external line machine is flexible, and the operator needs to carry out the corresponding cleaning work in time according to the regulations.
The thick material external line machine can help the operation to improve the work efficiency, so that everyone can have more time and energy to do their own work. And after using it for a period of time, the thick material outer line machine also needs maintenance, so what should we do?
The thick material outer wire machine also needs routine maintenance, mainly cleaning, lubricating, checking and tightening, and it needs to be carried out in time when the equipment is working or when it is shut down. In addition to routine maintenance work and cleaning, more specific maintenance is required in each cycle. At this time, it is also necessary to check and adjust each structure of the entire equipment, and at the same time eliminate the possibility of problems and hidden troubles. , Replace severely worn parts, and timely check the working status and performance of the diagnostic equipment.
Therefore, when the season is changing, operators need to inspect and maintain the power system, belts and other control parts of the thick material outside machine. When the equipment is in a state of being out of service for a long time, we should first clean, moisture and corrosion in advance.
